MALLINCKRODT CHEMICAL INC -- ALIZARIN -- 6810-00N082275
===================== Product Identification ===================== Product ID:ALIZARIN MSDS Date:12/19/1986 FSC:6810 NIIN:00N082275 === Responsible Party === Company Name:MALLINCKRODT CHEMICAL INC Box:800 City:PARIS State:KY ZIP:40362 Country:US Info Phone Num:314-539-1600 Emergency Phone Num:314-539-1600; 314-982-5000 CAGE:23104 === Contractor Identification === Company Name:MALLINCKRODT CHEMICAL WORKS LTD Address:600 DELMAR City:POINTE CLAIRE QUE CAN H9R CAGE:23104 Company Name:MALLINCKRODT SPECIALTY CHEMICALS CO Address:222 RED SCHOOL LANE Box:City:PHILLIPSBURG State:NJ ZIP:08865 Country:US Phone:908-859-2151 CAGE:62910 ============= Composition/Information on Ingredients ============= Ingred Name:ANTHRAQUINONE, 1,2-DIHYDROXY-; (ALIZARIN DYE) CAS:72-48-0 RTECS #:CB6580000 Fraction by Wt: 97% OSHA PEL:N/K ACGIH TLV:N/K ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:ACUTE: INHAL: DUST MAY IRRITATE RESP TRACT. MAY CAUSE COUTHING & SNEEZING. INGEST: NO INFO FOUND, BUT BASED ON ANIMAL STUDIES, SUBSTANCE IS PRESUMED TO BE MOD TOX. SKIN: CAUSES IRRIT. MAY CAUSE DERM. EYES: CAUSES SEV IRRIT W/REDNESS & PAIN. CHRONIC: NO INFO FOUND. Explanation of Carcinogenicity:NOT RELEVANT. Effects of Overexposure:SEE HEALTH HAZARDS. Medical Cond Aggravated by Exposure:NO INFORMATION FOUND. ======================= First Aid Measures ======================= First Aid:INHAL: REMOVE TO FRESH AIR. IF NOT BRTHG, GIVE ARTF RESP. IF BRTHG IS DFCLT, GIVE OXYGEN. CALL MD. INGEST: IF SWALLOWED, CALL MD IMMED. SKIN: REMOVE ANY CONTAM CLTHG. WASH SKIN W/SOAP/MILD DETERGENT & WATER FOR AT LEAST 15 MIN. GET MED ATTN IF IRRIT DEVELOPS/PERSISTS. EYES: WASH W/PLENTY OF WATER FOR AT LEAST 15 MIN, LIFTING LOWER & UPPER EYELIDS OCCASIONALLY. GET MED ATTN IMMED. ===================== Fire Fighting Measures ===================== Extinguishing Media:WATER SPRAY, DRY CHEMICAL, ALCOHOL FOAM, OR CARBON DIOXIDE. Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT . Unusual Fire/Explosion Hazard:AS WITH MOST ORG SOLIDS, FIRE IS POSS AT ELEVATED TEMPS/BY CONT W/IGNIT SOURCE. FINE DUST DISPERSED IN AIR IN SUFFICIENT CONCS, & IN PRESENCE OF IGNIT (SUP DAT) ================== Accidental Release Measures ================== Spill Release Procedures:REMOVE ALL SOURCES OF IGNIT. VENT AREA. CLEAN-UP PERS MAY REQUIRE NIOSH APPRVD PROT FROM INHAL OF DUST. CLEAN-UP SPILLS IN A MANNER THAT DOES NOT DISPERSE DUST INTO AIR. USE NON-SPARKING TOOLS. PICK U P FOR RECOVERY/DISP & PLACE IN CLSD CONTR. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:KEEP IN A TIGHTLY CLOSED CONTAINER, STORED IN A COOL, DRY, VENTILATED AREA. PROTECT AGAINST PHYSICAL DAMAGE. ISOLATE FROM INCOMPATIBLE SUBSTANCES. Other Precautions:DO NOT BREATHE DUST. AVOID CONTACT WITH EYES, SKIN AND CLOTHING. KEEP CONTAINER CLOSED. USE WITH ADEQUATE VENTILATION. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:FOR CONDITIONS OF USE WHERE EXPOSURE TO THE DUST IS APPARENT, A NIOSH APPROVED DUST/MIST RESPIRATOR MAY BE WORN. FOR EMERGENCIES, A NIOSH APPROVED SCBA MAY BE NECESSARY. Ventilation:A LOC EXHST SYS WHICH CAPTURES CONTAMINANT AT ITS SOURCE IS REC TO PREVENT DISPERSION OF CONTAMINANT INTO WORKROOM AIR. Protective Gloves:IMPERVIOUS GLOVES . Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES . Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING ANSI DESIGN CRITERIA . LAB COAT, APRON OR COVERALLS. Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. CONTACT LENSES SHOULD NOT BE WORN WHEN WORKING WITH THIS MATERIAL. Supplemental Safety and Health EXPLO HAZ: SOURCE IS A POTENTIAL DUST EXPLO HAZ. ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:806F,430C Melt/Freeze Pt:M.P/F.P Text:>547F,>286C Solubility in Water:SPARINGLY SOLUBLE Appearance and Odor:ORANGE-RED CRYSTALS OR BROWNISH RED POWDER ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZERS. Stability Condition to Avoid:STABLE UNDER ORDINARY CONDITIONS OF USE AND STORAGE. Hazardous Decomposition Products:CARBON DIOXIDE AND CARBON MONOXIDE MAY FORM WHEN HEATED TO DECOMPOSITION. ==================== Disposal Considerations ==================== Waste Disposal Methods:WHATEVER CANNOT BE SAVED FOR RECOVERY MAY BE BURNED IN AN APPROVED INCINERATOR OR DISPOSED IN AN APPROVED WASTE FACILITY. ENSURE COMPLIANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.