AMEREX CORP -- COPPER POWDER -- 6810-00N059499
=====================  Product Identification  =====================

Product ID:COPPER POWDER
MSDS Date:08/25/1995
FSC:6810
NIIN:00N059499
=== Responsible Party ===
Company Name:AMEREX CORP
Address:7595 GADSDEN HWY
Box:81
City:TRUSSVILLE
State:AL
ZIP:35173-0081
Country:US
Info Phone Num:205-655-3271
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:DO025
=== Contractor Identification ===
Company Name:AMEREX CORP
Box:81
City:TRUSSVILLE
Phone:205-655-3271/800-424-9300(CHEMTREC)
CAGE:DO025
Company Name:AMEREX CORPORATION
Address:7595 GADSDEN HWY E
Box:81
City:TRUSSVILLE
State:AL
ZIP:35173-0081
Country:US
Phone:205-655-3271
CAGE:54905

=============  Composition/Information on Ingredients  =============

Ingred Name:COPPER (SARA 313) (CERCLA)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: 100%
OSHA PEL:0.1MG/M3 FUME;1 DUST
ACGIH TLV:0.2 MG/M3 FUME
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: THIS EXTING MATL PRESENTS ONLY
    A SLIGHT RISK OF CAUSING ACUTE HLTH EFTS. IF SUCH EFTS OCCUR, THEY
    WILL BE IN THE FORM OF MILD IRRIT OF THE SKIN, NOSE OR THROAT & MOD
    IRRIT OF EYES. IF INGESTED,  THIS PROD MAY CAUSE AN UPSET STOMACH.
    INHAL: MAY CAUSE MILD IRRIT OF NOSE, THROAT & OTHER TISS OF RESP
    SYS. SKIN: CNTCT W/DUST MAY CAUSE MOD IRRIT & REDDENING OF SKIN &
    DISCOMFORT. NO COMPONENT OF TH IS PROD IS KNOWN TO ABSORB THRU
    SKIN. EYE: CNTCT MAY CAUSE IRRIT, DISCOLORATION & POSS TISS DMG.
    INGEST: MAY CAUSE MILD GASTRIC DISTRESS. INGEST CAN LEAD TO NAUS &
    VOMIT. INJECTION: WHILE INJECTION OF  (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: THIS PROD IS UNLIKELY, IT MAY OCCUR
    AS RESLT OF PUNCTURE OR CUT W/SHARP OBJECT CONTAMD W/EXTING AGENT.
    MILD SYMPS SIMILAR TO THOSE OF SKIN IRRIT MAY OCCUR. CHRONIC: THIS
    PROD IS NOT KNOWN TO  CAUSE ANY CHRONIC ILLNESSES OR DISEASES.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:SKIN: IMMED BEGIN DECONTAM W/RUNNING WATER. REMOVE
    EXPOSED/CONTAMD CLTHG, TAKING CARE NOT TO CONTAM EYES. IF
    REDDENING/IRRIT OCCURS, SEEK IMMED MED ATTN. EYE: OPEN EYES WHILE
    UNDER GENTLE RUNNING WATE R. USE SUFFICIENT FORCE TO OPEN EYELIDS.
    HAVE VICTIM "ROLL" EYES. MINIMUM FLUSHING IS FOR 15 MIN. INHAL:
    REMOVE TO FRESH AIR. IF NEC, USE ARTF RESP TO SUPPORT VITAL FUNCS.
    IF REDDENING/IRRIT OCCURS, V ICTIM & RESCUERS MUST SEEK IMMED MED
    ATTN. INGEST: CALL MD OR POIS CTL CTR FOR MOST CURRENT INFO. IF
    PROFESSIONAL ADVICE IS NOT AVAIL, DO NOT INDUCE VOMIT. VICTIM
    SHOULD DRINK MILK, EGG WHITES OR LARG E QTYS OF WATER. NEVER INDUCE
    (SUP DAT)

=====================  Fire Fighting Measures  =====================

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE . NOT
    APPLICABLE. THIS IS A FIRE EXTINGUISHING AGENT.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT . INCIPIENT FIRE RESPONDERS SHOULD WEAR EYE
    PROTECTION.
Unusual Fire/Explosion Hazard:WHEN INVOLVED IN A FIRE, THIS MATERIAL
    MAY PRODUCE COPPER METAL FUMES AND COPPER OXIDES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:UNCONTROLLED RELS SHOULD BE RESPONDED TO BY
    TRAINED PERS USING PRE-PLANNED PROCS. PROPER PROT EQUIP SHOULD BE
    USED. IN CASE OF A SPILL, CLEAR AFFECTED AREA, PROTECT PEOPLE &
    RESPOND W/TRAINED PERS. FO R EXPOSURE TO PARTICULATE LEVELS > REG
    LEVELS (I.E. 1.0 MG/M3 OF DUST) USE LEVEL C:TRIPLE-GLOVES (RUBBER
    GLOVES & NITRILE GLOVES OVER LATEX GLOVES), CHEM RESISTANT SUIT &
    BOOTS, HARD-HAT (OTHER INFO)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:ALL EMPLOYEES WHO HANDLE THIS MATERIAL
    SHOULD BE TRAINED TO HANDLE IT SAFELY.
Other Precautions:PROT PRACTS DURING MAINT OF CONTAMD EQUIP:FOLLOW
    PRACTS INDICATED IN SPILL PRC. MAKE CERTAIN APPLIC EQUIP IS LOCKED
    & TAGGED-OUT SAFELY. ALWAYS USE PROD IN AREAS WHERE ADEQ VENT IS
    PROVIDED. DECONTAM	EQUIP USING SOAPY WATER BEFORE MAINT BEGINS.
    COLLECT ALL RINSATES & DISPOSE OF ACCDG TO APPLIC FED,  STATE &
    LOCAL PROCS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
    FOR EXPOSURE OF CONCERN . RESPIRATORY PROT IS NOT EXPECTED TO BE
    NEEDED. IF RESPIRATORY PROT IS NEEDED, USE PROT AUTHORIZED IN 29
    CFR 1910.104 OR A PPLIC STATE REGULATIONS.
Ventilation:USE WITH ADEQUATE VENTILATION. USE A MECHANICAL FAN OR VENT
    AREA TO OUTSIDE.
Protective Gloves:RUB GLOVES FOR ROUTINE INDUS USE. USE TRIPLE GLOVES
    FOR SPILL RESPONSE.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER . USE
    BODY PROTECTION APPROPRIATE FOR TASK.
Work Hygienic Practices:AVOID GETTING CHEMICALS ON YOU OR IN YOU. WASH
    HANDS AFTER HNDLG CHEMICALS. DO NOT EAT OR DRINK WHILE HNDLG
    CHEMICALS.
Supplemental Safety and Health
FIRST AID PROC: VOMIT OR GIVE DILUENTS (MILK OR WATER) TO SOMEONE WHO
    IS UNCONSCIOUS, HAVING CONVULSIONS OR WHO CANNOT SWALLOW. IF EXPOS
    CAUSES OBVIOUS DISTRESS, VICTIM(S) & RESCUERS MUST BE TAKEN FOR 
    MED ATTN. TAKE COPY OF LABEL & MSDS TO MD OR HEALTH PROFESSIONAL
    WITH VICTIM.

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:>1000.C, ######F
Spec Gravity:3.4
Solubility in Water:NOT SOLUBLE
Appearance and Odor:REDDISH PWODER.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
EXPLOSIVELY INCOMPAT W/SODIUM AZIDE. COPPER DUSTS MAY REACT W/ACETYLENE
    GAS TO FORM COPPER ACETYLIDES WHICH ARE SENSITIVE TO SHOCK.
Stability Condition to Avoid:INCOMPATIBLE MATERIALS.
Hazardous Decomposition Products:COPPER FUMES, COPPER OXIDES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASTE DISP MUST BE I/A/W APPROP FED, STATE &
    LOCAL REGS. THIS PROD, IF UNALTERED BY USE, MAY BE DISPOSED OF BY
    TREATMENT AT A PERMITTED FACILITY/AS ADVISED BY LOCAL HAZ WASTE
    REGULATORY AUTH. RESIDUE  FROM FIRES EXTINGD W/THIS MATL MAY BE
    HAZ.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.