PARKER PAINT -- 3810, WALL GLOW DEEP BASE  -- 8010-00N031114
<pre>=====================  Product Identification  =====================

Product ID:3810, WALL GLOW DEEP BASE
MSDS Date:06/01/1987
FSC:8010
NIIN:00N031114
MSDS Number: BPGYT
=== Responsible Party ===
Company Name:PARKER PAINT
Address:3326 SOUTH JUNETT
Box:11047
City:TACOMA
State:WA
ZIP:98411-0047
Country:US
Info Phone Num:206-473-1122
Emergency Phone Num:206-473-1122
Preparer's Name:B. WEAR
CAGE:9H480
=== Contractor Identification ===
Company Name:PARKER PAINT
Address:3003 SOUTH TACOMA WAY
Box:11047
City:TACOMA
State:WA
ZIP:98409
Country:US
Phone:253-473-1122
CAGE:9H480

=============  Composition/Information on Ingredients  =============

Ingred Name:SILICON DIOXIDE (AMORPHOUS)
CAS:67762-90-7
Fraction by Wt: 5%
OSHA PEL:0.1 MG/M3 (MFR)

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: OVEREXPOSURE MAY CAUSE
    HEADACHE, NAUSEA OR SKIN/EYE IRRITATION. CHRONIC: UNPROTECTED
    OVEREXPOSURE TO MISTS FROM SPRAY APPLICATION MAY CAUSE LUNG DISEASE
    (SILICOSIS).
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:INHAL:HIGH CONC OF VAPORS MAY CAUSE HDCH,
    NAUSEA & IRRIT OF NOSE, THROAT OR LUNGS. SKIN/EYE:EYE CONT MAY
    CAUSE IRRIT OR BURNING. RPTD LIQUID CONT MAY CAUSE IRRIT & DERM.
    INGEST:SWALLOWING CAN CAUSE GI  IRRIT, NAUSEA, VOM & DIARR. VOM CAN
    RSLT IN ASPIR OF MATL INTO LUNGS WHICH CAN CAUSE CHEMICAL
    PNEUMONITIS.
Medical Cond Aggravated by Exposure:NONE KNOWN AT THIS TIME.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR. IF BREATHING HAS STOPPED, APPLY
    ARTF RESP. CONSULT MD. EYE:WASH W/CLEAN WATER FOR AT LEAST 15 MINS.
    CONSULT MD. SKIN:WASH AFFECTED AREAS W/SOAP & WATER. REMOVE
    CONTAMINATED  CLOTHING. CONSULT MD. INGEST:DRINK 1 OR2 GLASSES OF
    WATER TO DILUTE. CONSULT MD OR POISON CONTROL CENTER IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:FOAM, ALCOHOL FOAM, CO2 & DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WATER MAY BE USED TO COOL CLOSED
    CONTAINERS TO PREVENT PRESSURE BUILD UP & EXPLOSION WHEN EXPOSED TO
    EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA. PREVENT SKIN/EYE CONTACT &
    BREATHING OF VAPOR. CONTAIN & REMOVE W/INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 200F.
Other Precautions:DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF
    CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT REQUIRED FOR BRUSH & ROLL APPLICATION. FOR
    SPRAY APPLICATION, WEAR A PROPERLY FITTED NIOSH/MSHA (TC-23C)
    APPROVED VAPOR/PARTICULATE RESPIRATOR UNTIL ALL VAPORS & SPRAY MIST
    ARE EXHAUSTED.
Ventilation:PROVIDE SUFFICIENT VENT IN VOL & PATTERN TO KEEP AIR
    CONTAMINANT CONC BELOW APPLIC PEL/TLV OCCUP EXPOS LIMITS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:COVERALLS, GLOVES & HOOD ARE RECOM DURING
    SPRAY APPLICATN, PROT CREAMS MAY BE USED FOR EASE OF CLEAN UP, NOT
    FOR PROT.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING THE RESTROOM.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Density:LTR/AIR
Spec Gravity:1.2 (H2O=1)
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Solubility in Water:DILUTABLE
Appearance and Odor:WHITE COLORED LIQUID W/AMMONIACAL ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE KNOWN AT THIS TIME.
Stability Condition to Avoid:DO NOT HEAT ABOVE 200F.
Hazardous Decomposition Products:NONE KNOWN AT THIS TIME.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT ALLOW MATERIAL TO CONTAMINATE GROUND
    WATER SYSTEMS. ABSORB LARGE SPILL W/SAND, CLAY OR DIATOMACEOUS
    EARTH. DISPOSE IN ACCORDANCE W/LOCAL, STATE & FEDERAL DISPOSAL
    REQUIREMENTS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.