WITCO CHEMICAL CO - ORGANIC DIVISION -- CARBON BLACK -- 6810-01-184-7390
=====================  Product Identification  =====================

Product ID:CARBON BLACK
MSDS Date:12/16/1985
FSC:6810
NIIN:01-184-7390
=== Responsible Party ===
Company Name:WITCO CHEMICAL CO - ORGANIC DIVISION
Address:3230 BROOKFIELD ST
City:HOUSTON
State:TX
ZIP:77045-6610
Country:US
Emergency Phone Num:302-328-5661/504-738-1623
CAGE:4X549
=== Contractor Identification ===
Company Name:WITCO CORP, ORGANICS DIV
Address:3200 BROOKFIELD ST
Box:City:HOUSTON
State:TX
ZIP:77045
Country:US
Phone:713-433-7281
CAGE:4X549

=============  Composition/Information on Ingredients  =============

Ingred Name:NO TOXIC OR HAZARDOUS INGREDIENTS.
RTECS #:9999999ZZ
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NO DATA FOUND
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:NO SPECIFIC INFORMATION AVAILABLE.
Effects of Overexposure:INHALATION- BREATHING DUST MAY IRRITATE THE
    NOSE AND THROAT AND CAUSE COUGHING AND CHEST DISCOMFORT.  EYES-
    DUSTS MAY IRRITATE THE EYES.
Medical Cond Aggravated by Exposure:NONE REPORTED.

=======================  First Aid Measures  =======================

First Aid:INHALATION- REMOVE TO FRESH AIR. GIVE ARTIFICIAL RESPIRATION
    IF NOT BREATHING. GET IMMEDIATE MEDICAL CARE.  EYES- IMMEDIATELY
    FLUSH EYES WITH LOTS OF RUNNING WATR FOR 15 MIN., LIFTING THE UPPER
    AND LO WER EYELIDS OCCASIONALLY. GET IMMEDIATEMEDICAL ATTENTION. 
    SKIN- IMMEDIATELY WASH SKIN WITH LOTS OF SOAP AND WATER. REMOVE
    CONTAMINATED CLOTHING.  INGESTION- DO NOT INDUCE VOMITING. GIVE
    WATER/MILK.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, WATERFOG, SAND OR
    EARTH.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS WHEN
    FIGHTING FIRES INVOLVING THIS MATERIAL.
Unusual Fire/Explosion Hazard:IT MAY NOT BE OBVIOUS THAT THE CARBON
    BLACK IS BURNING UNLESS THE MATERIAL IS STIRRED AND SPARKS ARE
    APPARENT. HAZARDOUS DECOMPOSITION PRODUCED IN FIRE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR PROTECTIVE EQUIPMENT INCLUDING RUBBER
    BOOTS, RUBBER GLOVES, RUBBER APRON, AND A SELF-CONTAINED BREATHING
    APPARATUS IN THE PRESSURE DEMAND MODE OR A SUPPLIED-AIR RESPIRATOR.
    SWEEP UP ANDDISPOSE OF  IN A DOT-APPROVED WASTE CONTAINER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY, WELL-VENTILATED
    PLACE AWAY FROM INCOMPATIBLE MATERIALS. THIS PRODUCT IS A GOOD
    CONDUCTOR OF ELECTRICITY.
Other Precautions:CONTAINERS, EVEN THOSE THAT HAVE BEEN EMPTIED, WILL
    RETAIN PRODUCT RESIDUE AND VAPORS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR A NIOSH-APPROVED RESPIRATOR APPROPRIATE FOR
    CONTROL OF DUST GENERATED WITH THIS MATERIAL.
Ventilation:LOCAL MECHANICAL EXHAUST VENTILATION CAPABLE OF MAINTAINING
    DUST EMISSIONS AT THE POINT OF USE BELOW THE TLV.
Protective Gloves:RECOMMENDED.
Eye Protection:CHEMICAL GOGGLES AND FULL FACE SHIELD.
Other Protective Equipment:LONG-SLEEVED SHIRT, TROUSERS, SAFETY SHOES.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER HANDLING THIS
    MATERIAL.
Supplemental Safety and Health
NONE

==================  Physical/Chemical Properties  ==================

HCC:N1
Decomp Temp:Decomp Text:600F,316C
Spec Gravity:1.7 - 1.9
Solubility in Water:INSOLUBLE
Appearance and Odor:AMORPHOUS BLACK SOLID, ODORLESS.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, SUCH AS CHLORATES, NITRATES, PEROXIDES, ETC.
Stability Condition to Avoid:HEAT, SPARKS, AND OPEN FLAMES.
Hazardous Decomposition Products:MAY LIBERATE CARBON MONOXIDE, CARBON
    DIOXIDE, AND OXIDES OF SULFUR.
Conditions to Avoid Polymerization:POLYMERIZATION WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONSULT APPROPRIATE FEDERAL, STATE AND LOCAL
    REGULATORY AGENCIES TO ASCERTAIN PROPER DISPOSAL PROCEDURES.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.